Wiki-Quellcode von Operating Systems

Zuletzt geändert von Steffi F am 2026/06/01 09:10
Zeige letzte Bearbeiter
1 {{aagon.floatingbox/}}
2
3 (% class="wikigeneratedid" %)
4 The Windows operating system is one of the four components required for a full rollout in ACMP OS Deployment and must be specified.
5 You can choose whether the operating system will be setup-based or an image.
6
7 {{figure}}
8 [[image:OSD_Betriebssystem.png]]
9 {{/figure}}
10
11 = Add an Operating System =
12
13 To create a new operating system, go to the //Operating System// section in the ribbon bar and click //Add//.
14
15 A wizard will open. On the first page, specify the output directory where the operating system should be saved, as well as its name and, if desired, a description.
16
17 {{figure}}
18 [[image:6.9_Betriebssystem hinzufügen_Wizard.png]]
19
20 General information
21 {{/figure}}
22
23 Click //Next >//.
24
25 On the second page, you can choose which operating system types you have as sources and want to upload.
26
27 Here, you can choose between a setup-based (DVD/ISO) or image-based (DISM) installation.
28
29 {{aagon.infobox}}
30 If you want to upload an image, please note the following:
31 ~1. For the WIM file, you must first perform the installation of Windows, configuration, generalization, and export using DISM yourself.
32 2. A Boot Image from Windows 8 or later is required.
33 {{/aagon.infobox}}
34
35 (% style="text-align:center" %)
36 [[image:6.9_Betriebssystem_Quelle.png]]
37 Select operating system type
38
39 {{aagon.infobox}}
40 If you use DISM to capture an image of a Windows installation and want to add it as an operating system, the “Edition” and “Installation” fields may not be populated.
41 This behavior occurs when attempting to capture a large Windows installation (including Windows Updates and software) and the temporary directory, which is located in RAM, becomes full.
42 To specify a different location for the temp directory, use the /ScratchDir parameter when calling dism.exe as follows:
43 dism.exe /capture-image /imagefile:F:\install.wim /capturedir: D:\ /name:”Windows 8.1 Enterprise” /description:”Windows 8.1 Enterprise” /ScratchDir:C:\TempFuerDISM
44 If you do not specify a path, the \Windows\%Temp% directory is used.
45 {{/aagon.infobox}}
46
47 After selecting the source, it will be imported. The details will then be displayed at the bottom of the window.
48 After clicking Next >, you can use DISM to integrate drivers or entire driver packages directly into the Install.wim file. To do so, access the previously created drivers. If you have not added any drivers yet, you can complete this step later if necessary.
49
50 {{aagon.infobox}}
51 We recommend assigning the drivers directly via the Rollout Template. This prevents the operating system’s Install.wim from becoming unnecessarily bloated. It also gives you much more flexibility regarding the selection of drivers, since you can remove them from the Rollout Template at any time.
52 {{/aagon.infobox}}
53
54 Now decide whether the operating system should be synchronized directly with a file repository before selecting the final tasks on the next screen.
55
56 (% style="text-align:center" %)
57 [[image:XWiki.Images.WebHome@hmfile_hash_4a06a2e6.png||alt="12.2 - Abschließende Aufgaben-OS" height="415" width="547"]]
58 Select final assignments
59
60 On the last page of the wizard, you can select which tasks should be executed after the operating system is added by checking the appropriate boxes.
61
62 The //Save and Transfer to ACMP Server// option transfers the operating system to the server and automatically creates a local copy. If you frequently change the operating system, the local copy allows you to minimize network load. If the operating system has been changed by another user or you do not have a local copy, you will receive a note before making a change to the operating system that the current version will first be loaded from the Server.
63
64 Enable the //Share// option to distribute the operating system to your file repositories.
65
66 {{aagon.infobox}}
67 You can complete all disabled tasks at any time directly in the ACMP Console.
68 {{/aagon.infobox}}
69
70 Click //Done// to finish adding the Boot Image.
71
72 (% style="text-align:center" %)
73 [[image:XWiki.Images.WebHome@hmfile_hash_88f70f4f.png||alt="12.3 - Betriebssystem hinzufuegen" height="416" width="546"]]
74 Add an operating system
75
76
77 Once the data has been processed, you will see the added operating system in the workspace, including its name, description, architecture, version, language, and size.
78 You can also view its properties. 
79 The following information is available:
80
81 |(((
82 [[image:synchronization_nottransferred.png||alt="Synchronization_NotTransferred" data-xwiki-image-style-alignment="center" height="32" width="32"]]
83 )))|(((
84 The operating system is not synchronized with the ACMP Server
85 )))
86 |(((
87 [[image:ACMP.63.ACMP-Solutions.Client-Management.Container.WebHome@Status_Always.ico||alt="Status_Always" data-xwiki-image-style-alignment="center" height="32" width="32"]]
88 )))|(((
89 Synchronization with the ACMP Server is finished
90 )))
91 |(((
92 [[image:bootimage_locked.png||alt="BootImage_Locked" data-xwiki-image-style-alignment="center" height="32" width="32"]]
93 )))|(((
94 The operating system has not been transferred to the file repositories
95 )))
96 |(((
97 [[image:bootimage_unlocked.png||alt="BootImage_Unlocked" data-xwiki-image-style-alignment="center" height="32" width="32"]]
98 )))|(((
99 The operating system has been released and uploaded to the file repositories.
100 )))
101 |(((
102 [[image:bootimage_localcopyexists.png||alt="BootImage_LocalCopyExists" data-xwiki-image-style-alignment="center" height="32" width="32"]]
103 )))|(((
104 A local copy of the operating system was found. No icon is displayed.
105 )))
106 |(((
107 [[image:bootimage_localmodified.png||alt="BootImage_LocalModified" data-xwiki-image-style-alignment="center" height="32" width="32"]]
108 )))|(((
109 A local copy of the operating system was found, but it is deprecated.
110 )))
111
112 = Possible errors when adding an image-based operating system =
113
114 If you want to add an image as the operating system for the Rollout, it is recommended that you use an image that does not have the ACMP Agent pre-installed for the OSD.
115
116 If an ACMP Agent is already installed, the following errors may occur:
117
118 * The client’s computer name is displayed incorrectly until the Rollout is finished and the computer scanner has re-inventoried the client
119 * Post deployment is not executed and the Rollout is not finished
120
121 = Local copies of operating systems =
122
123 Every time you create an operating system, you will be asked if you want to create a local copy. This local copy reduces network traffic when you repeatedly customize the operating system.
124 Local copies of the operating systems are stored in the following path: %ProgramData%\Aagon\ACMP\Console\LocalStorage\OS.
125 In the operating system overview, you can use the “Copy in local storage” icon to see if a local copy is available.
126 If you select the operating system stored in the ACMP Console and a local copy of the operating system is available, you have the following options.
127
128 |(((
129 [[image:XWiki.Images.WebHome@localcopy_download.png||alt="LocalCopy_Download" data-xwiki-image-style-alignment="center" height="32" width="32"]]
130 )))|(((
131 This process overwrites the locally installed operating system with the one from the Server
132 )))
133 |(((
134 [[image:XWiki.Images.WebHome@localcopy_delete.png||alt="LocalCopy_Delete" data-xwiki-image-style-alignment="center" height="32" width="32"]]
135 )))|(((
136 This will delete the local operating system and free up local storage space
137 )))
138 |(((
139 [[image:XWiki.Images.WebHome@localcopy_openlocation.png||alt="LocalCopy_OpenLocation" data-xwiki-image-style-alignment="center" height="32" width="32"]]
140 )))|(((
141 Open the directory where the local copy of the operating system is located
142 )))
© Aagon GmbH 2026
Besuchen Sie unsere Aagon Community