Wiki source code of OSD Logging
Last modified by Steffi F on 2025/09/29 13:34
Hide last authors
| author | version | line-number | content |
|---|---|---|---|
 |
7.3 | 1 | OSD logging helps you to create a //debug boot image//. |
| |
1.1 | 2 | |
| |
7.3 | 3 | First, create a SmartInspect configuration file and save it in “%SERVER%\FileRepository\PETools\x86” or “%SERVER%\FileRepository\PETools\x64”. |
| |
1.1 | 4 | |
| |
7.3 | 5 | We have provided two sample files for you in “%SERVER%\Support\Logging\OSDLogConfig”. In these files, you must replace the existing IP 192.168.100.1 with the IP address on which the SmartInspect Console is running on your system. |
| |
1.1 | 6 | |
| |
7.3 | 7 | If you now create a Boot Image, these configuration files will be integrated and you will receive a “Debug Boot Image”. |
| |
1.1 | 8 | |
| 9 | {{aagon.infobox}} | ||
| |
7.3 | 10 | The configuration files created should be deleted after creating the boot image, as otherwise they will be integrated each time a boot image is created and you will receive a debug boot image. |
| |
1.1 | 11 | {{/aagon.infobox}} |
| 12 | |||
| 13 | = = |