Settings

Last modified by Sabrina V. on 2026/07/23 10:59

Content

Changing Settings via the Configuration File (Config.xml)
- Storage location
- Sections

The settings in ACMP are organized into various sections that you can configure.

In addition, you can change settings directly via the configuration file.

Changing Settings via the Configuration File (Config.xml)

In addition to the settings you can customize directly in the ACMP Console, others can only be customized via a configuration file. This section lists the configuration options that can only be customized via config.xml. If the values for a section can be customized in a full manner via the ACMP Console, that section is not listed here.

Warning:

Customizations to the configuration file directly affect the functions and appearance of the ACMP Console. Therefore, be sure to create an unmodified backup copy before you begin customizing it!

Storage location

Note:

To customize the configuration file, you must exit the ACMP Server service!
Note that the configuration file is only located here if the ACMP Server service has been exited.

The configuration file is located in the following directory:

%ProgramData%\Aagon\ACMP\Server\Config\%ServerId%\Config.xml

The %ServerID% is unique to each installation and can be found in the Server.ini file in the server directory.

Sections

The configuration file is divided into several sections so that you can quickly find and customize the function you're looking for.

ClientConfig

Name	Value range	Default value	Description
ConnectionReadTimeout	Seconds	3600	The time a client connection waits for data from the Server.
SearchOnlineForInstallableWindowsUpdates	true false	true	Specifies whether the WUM Scanner should find Windows Updates that can be installed online.
PortRangeStart	Integer	12666
PortRangeEnd	Integer	12699
UserLoginTimeThresholdInSeconds	Integer	30	Specifies the number of seconds that a user login may have occurred in the past and still be counted as a new user login for the agent (This does not affect jobs that were not executed during user login because the Windows user login occurs before the ACMP Agent starts).
ShutdownDialogWaitPeriodInSeconds	Integer	10	Specifies the number of seconds the shutdown dialog waits on the Client before the shutdown jobs are started automatically.
CanAbortShutdownJobs	true false	true	Specifies whether users can cancel jobs during shutdown in the shutdown dialog. If the value is false, the jobs start immediately without a delay.
WUSPort	Integer	8530	The port on which the Client listens for Windows Update requests.

ServerConfig

Name	Value range	Default value	Description
FileRepoPath	Windows Pfad		Path to the ACMP Server's file repository
FileRepoUserName	Text		Username, used when FileRepoUseAuthentication = true
FileRepoPassword	Encrypted text		Password used when FileRepoUseAuthentication = true
FileRepoUseAuthentication	true false	false	Specifies whether a connection to the file repository should be established.
SQLCommandTimeout	Seconds	30	Time until timeout for SQL calls
PushQueueSendThreadCount	Integer	5	Simultaneous Push Attempts
ServerConsolePortActive	true false		TCP port on the server for ACMP consoles only
ServerConsolePort	Integer	2109	TCP port on the server for ACMP consoles only
AcceptConsoleOnlyOnConsolePort	true false	false	Allow ACMP console connections only through the ACMP console port.
ServerTmpPath	Windows path	%AcmpServer%\Temp	Path to a directory that can be used as an ACMP temporary directory. This allows you to, for example, move the directory to a RAM disk with a capacity of several gigabytes.
ClientAddressMode	amIpAddress amComputerName amComputerFQDN	amIpAddress	Specifies whether the client should be addressed during a push using its primary IP address (amIpAddress), computer name (amComputerName), or FQDN (amComputerFQDN).
UseNagle	true false	false	Enables the Nagle algorithm for the ACMP Server's outgoing TCP connections. Does not affect incoming connections.
CanAcceptClientsWithEmptyServerId	true false	true	If this option is enabled, the ACMP Server allows clients that have sent an empty ServerId to establish a connection.
ConsoleTimeout	Integer	2880	Timeout in minutes after which an ACMP session exits due to inactivity.

ServerProxyConfig

Name	Value range	Default value	Description
HostName	string	update.aagon.com	The URL of the web server from which the definition files are downloaded. This applies to vulnerability management, as well as to Managed Software, DNA, and Windows Update Management.
UseOwnProxySettings	true false	false	Specify whether to use the proxy settings from Active Update (false) or whether different settings should be active (true).

AgentInstallationConfig

Name	Value range	Default value	Description
ScanActiveDirectoryForClients	true false	true	Specifies whether Clients should be imported into the agent installation via Active Directory.
LastActivityOfActiveDirectoryClientsInDays	Days	60	The number of days since a client last logged in to Active Directory in order to be included in the import.
ActiveDirectoryClientScanBaseDN	Text	Leerstring	Base DN, which is used to perform Active Directory Queries.
InstallServiceRetryTimeout	Minutes	10	Time between two installation attempts
MaxSimultaneousInstallThreads	Integer	5	Specifies the number of concurrent agent installations running at the same time.
PingTimeout	Integer	500	The number of milliseconds of the timeout to wait for when pinging an IP address within the IP range.

ClientCommandConfig

Name	Value range	Default value	Description
IsContainerInheritanceEnabled	true false	false	Gibt an, dass Clients sich auch Scripte vom ACMP Server ziehen, die sie durch eine ContainerStruktur vererbt bekommen haben.
IsContainerRecalcBeforeScriptExecutionEnabled	true false	true	Specifies whether a container recalculation should be executed before the execution of a Client Command.

HelpdeskConfig

Name	Value range	Default value	Description
DefaultSendCommentPerMail	true false	false	Specifies whether the “Send comment via email” checkbox is initially enabled or not. This option has no effect on the bulk change.

EMailConfig

Name	Value range	Default value	Description
TicketIdOpenTag	Text	{	Opening tag for the ticket ID used in emails. Spaces at the beginning or end of the tag are not supported.
TicketIdCloseTag	Text	}	Closing tag for the ticket ID used in emails. Spaces at the beginning or end of the tag are not supported.

MailConfig

Name	Value range	Default value	Description
AlwaysUseFileReceiver	true false	false	DEBUG KEY: XML import for emails; to test email processing without requiring an email Server.

Mailboxes

Name	Value range	Description
Name	Text	Display Name (not used)
Id	GUID	ID
ReplyToEMail	Email adress	Reply to email
ReplyToName	Text	Reply to name

WebInterfaceConfig

HdInfoList

Name	Value range	Default value	Description
CreatorID	GUID		Creator ID
CreationDate	ISO 8601 timestamp		Date of Creation
LastModified	ISO 8601 timestamp		Date of the last change
ModifierID	GUID		Modifier ID
HasStartDate	true false	false	Indicates whether StartDate has been set.
HasEndDate	true false	false	Indicates whether EndDate has been set.
PostDate	ISO 8601 timestamp		Used by the web interface for sorting multiple items.

DistribFileRepoConfig

Name	Value range	Default value	Description
NumberOfConnectionErrorsBeforePause	Ganzzahl	3	Gibt an, wie viele Verbindungsfehler auftreten können, bevor die unter TimeMinutesToWaitAfterConnectionFailure angegebene Zeit gewartet werden soll.
NumberOfSyncProcessors	Ganzzahl	2	Gib an, wie viele gleichzeitige Synchronisierungsvorgänge existieren.
TimeMinutesToWaitAfterConnectionFailure	Minuten	5	Gibt an, wie viele Minuten für einen neuen Versuch gewartet werden soll, nachdem NumberOfConnectionErrorsBeforePause erreicht wurde.
ConnectionTimeOut	Sekunden	30	Timeout beim Verbindungsversuch
AllowedFileSizeDelta	Kilobyte	0	Schwellwert der beim Dateigrößenvergleich erlaubt ist, bis die Datei als unterschiedlich gilt. Wenn Quell- und Zieldatei auf unterschiedlichen Dateisystemen liegen, kann es vorkommen das die API, aufgrund von unterschiedlicher Blockgröße, unterschiedliche Dateigrößen angibt.
EnableUncCopyResumption	true false	true	Standardmäßig ist der Wert auf true gesetzt, wodurch sich der Sync Service wie bisher verhält. Ist der Wert auf false, werden die Dateien nicht mehr zunächst als part~-Datei geschrieben und dann umbenannt, sondern direkt als Zieldatei geschrieben. Bei dem false ist kein Resume mehr möglich, wenn eine Datei zuvor nicht vollständig übertragen wurde (unvollständige Dateien werden immer erneut vollständig übertragen). Version note: Dieser Wert ist erst mit der ACMP Version 6.9.2 verfügbar.

QueryManagementConfig

Name	Wertebereich	Defaultwert	Beschreibung
RecordCountOfPage	Ganzzahl	25000	Anzahl der Zeilen pro Page eines Query Ergebnisses
ValueDirectoryScannerTimeoutInMinutes	Positive Ganzzahl	10	Anzahl der Minuten, welche der Server wartet, um nach Werteänderungen den ValueDirectoryScanner auszuführen.

ActiveUpdateConfig

NewUpdatesData

Name	Wertebereich	Defaultwert	Beschreibung
LastTimeCheckedForUpdatesOnWebServer	Fließkommazahl	0	TDateTime Wert des Zeitpunkts der letzten Prüfung auf Existenz von Updates auf dem Updateserver.

FinancialConfig

Name	Wertebereich	Defaultwert	Beschreibung
CurrencyCode	Text	EUR	Anzeigetext für die Kostenerfassung im Ticket Management.

DatabaseConfig

Name	Wertebereich	Defaultwert	Beschreibung
IsFullTextSearchSupported	true false	true	Gibt an, ob die SQL Server Volltextsuche installiert ist. Wird dynamisch ermittelt und zugewiesen.

LicenseManagementConfig

Name	Wertebereich	Defaultwert	Beschreibung
DNADetectionPatternResultCountLimit	1 - 2147483647 (Ganzzahl)	20.000	Definiert die maximal erlaubte Anzahl an zurück gelieferten Datensätzen bei den DNA Detection Patterns.

Office365portal

Name	Wertebereich	Defaultwert	Beschreibung
PortalLink	HTML Link	https://login.microsoftonline.com	Der Link zum Web Service für das Microsoft Office365 Portal.